Zte ZXR10 2928E-PS

ZXR102900ESeriesCongurationGuide
TheZXR102900Esupportsupto15aggregationgroups.Ineachaggregationgroup,the
numberofaggregatedlinksdoesnotexceedeight.Aggregatedlinksmusthavethesame
transmissionmediatypeandtransmissionrate.
ConguringLACP
TheLACPcongurationincludesthefollowingcommands:
CommandFunction
zte(cfg)#settrunk<trunklist>pvid<1-4094>SetsthedefaulttrunkVID.
zte(cfg)#setlacp{enable|disable}EnablesordisablestheLACPfunction.
zte(cfg)#setlacpaggregator<1-15>{add|delete}port<portlist>
Addsordeletesaspeciedportto/from
anLACPaggregationgroup.
zte(cfg)#setlacpaggregator<1-15>mode{dynamic|static|mixed}
SetsaggregationmodeofanLACP
aggregationgroup.
zte(cfg)#setlacpport<portlist>mode{active|passive}
Setsthemodeusedbytheportto
participateintheaggregation.
zte(cfg)#setlacpport<portlist>timeout{long|short}
Setsthetimeoutinformationoftheport
participatingintheaggregation.
zte(cfg)#setlacppriority<1-65535>SetsthepriorityofLACP .
zte(cfg)#setlacpload-balance{port|packet{L2|L3|L4}}SetsLACPloadbalancemode.
showtrunk(allcongurationmodes)
DisplaysthePVIDsofalltrunks
andunregisteredmulticastltering
conguration.
showtrunk[<trunklist>](allcongurationmodes)
DisplaysthetrunkPVIDand
unregisteredmulticastltering
conguration.
showtrunk<trunklist>vlan(allcongurationmodes)
DisplaystheVLANcongurationof
trunk.
showlacp(allcongurationmodes)
DisplaystheLACPglobalconguration
information.
showlacpaggregator(allcongurationmodes)
DisplaysallLACPaggregationgroups
briefinformation.
showlacpaggregator<1-15>(allcongurationmodes)
DisplaysindependentLACP
aggregationgroupdetailedstatus
information.
showlacpport(allcongurationmodes)
Displaysaggregationstatusinformation
ofalltheLACPmemberports.
showlacpport[<portlist>](allcongurationmodes)
DisplaysLACPmemberport
aggregationstatusinformation.
4-18
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential