Zte ZXR10 5250-28TC User Manual

ZXR105250SeriesCommandReference
ParameterDescription
addAddsthemrouterport.
deleteDeletesthemrouterport.
<1-28>
Numberofaport.Differentdeviceshavedifferentportnumber
ranges.Inthesyntax,the5250-28TCdeviceisusedasan
example.
Example
Thefollowingexampleaddsport9toVLAN1asanmrouterport:
zte(cfg)#setmldsnvlan1addmrouterport9
4.34.7setmldsnphost-time-out/mrouter-time-out
Purpose
Thiscommandsetsthetimeoutdurationofthemrouter/hostport.
CommandMode
Globalcongurationmode
Syntax
setmldsnooping{host-time-out|mrouter-time-out}<30-65535>
ParameterDescription
ParameterDescription
<30-65535>Agingtime(seconds).
host-time-outConguresthetimeoutdurationofthehostport.
mrouter-time-outConguresthetimeoutdurationofthemrouterport.
Guidelines
Whentheagingtimeisreached,mrouterportsandhostportsaredeletedfromthemulticast
group.
Default
Thedefaultagingtimeis260seconds.
Example
Thefollowingexamplesetstheagingtimeofthemrouterportto400secondsandthe
agingtimeofthehostportto300seconds:
4-514
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential

Zte ZXR10 5250-28TC Specifications

General

Model	ZXR10 5250-28TC
Category	Switch
Manageable	Yes
VLANs	4K
Jumbo Frame	9K
Storage Temperature	-40°C to 70°C
Power Supply	AC 100-240V
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1w, IEEE 802.1d, IEEE 802.1s
Routing Protocol	Static Routing
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)