To Next Page

To Previous Page

Chapter5ManagementConguration

ParameterDescription

<0-63>IPportnumber

Default

none

Example

ThefollowingexamplesetstheSNMPsourceIPaddresstotheIPaddressofIPport1:

zte(cfg-snmp)#setsrc-ipport1

5.4.4createcommunitypublic/private

Purpose

Thiscommandcreatesacommunityandallocatesrights.

CommandMode

SNMPcongurationmode

Syntax

createcommunity<string>{public|private}[ingress-acl-basic-number<1-99>]

ParameterDescription

<string>Communityname.

publicTheattributeofthecommunityisread-only.

privateTheattributeofthecommunityisread/write.

<1-99>IDoftheingressACLbasicgroupboundwiththecommunity.

Example

ThefollowingexamplecreatesacommunitynamedasBeijingandsetstheattributeto

read/write:

zte(cfg-snmp)#createcommunitybeijingprivate

5-11

SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential

Other manuals for Zte ZXR10 5250-28TC

Questions and Answers:

Need help?

Do you have a question about the Zte ZXR10 5250-28TC and is the answer not in the manual?

General

Model	ZXR10 5250-28TC
Category	Switch
Manageable	Yes
VLANs	4K
Jumbo Frame	9K
Storage Temperature	-40°C to 70°C
Power Supply	AC 100-240V
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1w, IEEE 802.1d, IEEE 802.1s
Routing Protocol	Static Routing
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)