Zte ZXR10 T600

ZXR10T600/T1200UserManual(IPv6Volume)
IS-ISv6BasicConfiguration
EnablingIS-ISv6
ToenableIS-ISv6,performthefollowingsteps.
St-
ep
CommandFunction
1
ZXR10(config)#routerisisThisenablesanisisroute
instance.
2
ZXR10(config-router)#system-id<id>
ThisconguressystemIDof
arouteentity.
3
ZXR10(config)#area<area-address>Thisdesignatesthearea
addressofIS-ISv6.
4
ZXR10(config)#interface<interface-name>Thisentersinterface
congurationmode.
5
ZXR10(config-if)#ipv6routerisisThisrunstheIS-ISv6protocol
onaninterface
Result:IS-ISv6hasbeenenabled.
ConfiguringIS-ISv6Global
Parameters
TocongureglobalparametersofIS-ISv6protocol,performthe
followingsteps.
St-
ep
CommandFunction
ZXR10(config)#routerisisThisentersIS-IS
congurationmode.
ZXR10(config-router)#area-password<password>
Thisconguresthepassword
oflevel-1.
Thecharacterstringof
passwordrangesfrom6to
128characters.
Thereisnopasswordof
level-1bydefault.
ZXR10(config-router)#domain-password<password>
Thisconguresthepassword
oflevel-2.
Thecharacterstringof
passwordrangesfrom6to
128characters.
1
44CondentialandProprietaryInformationofZTECORPORATION