Zte ZXR10 T600

ZXR10T600/T1200UserManual(IPv6Volume)
St-
ep
CommandFunction
ZXR10(config)#routerisisThisentersIS-IS
congurationmode.
ZXR10(config-router)#is-type{level-1|level-2-only
|level-1-2}
Thiscongurestherouting
levelforarouter .
Thedefaultrouterislevel-1–2
router .
ZXR10(config-router)#ignore-lsp-errorsThissetstheIS-ISv6toignore
theLSPchecksumerror .
ZXR10(config-router)#metric-style{narrow|wide}
Thisconguresthemetric
styleofarouter .
5
ZXR10(config-router)#set-overload-bit[suppress
{external[interlevel]|interlevel[external]}|
on-startup<5-86400>[suppress{external
[interlevel]|interlevel[external]}]]
Thissetstheoverload-bitin
theLSPpacketssentbyit.
ZXR10(config)#routerisisThisentersIS-IS
congurationmode.
ZXR10(config-router)#redistribute{{bgp|
connected|ospf|rip|static}[[level-1|level-2|
level-1-2]|metric<0-63>|[external|internal]]}
Thisconguresroute
redistribution,redistributing
routesofotherprotocolsinto
IS-ISv6.
6
ZXR10(config-router)#summary-prefixX:X::X:X/<
0~128>[level-1|level-1-2|level-2]
ThiscongurestheIS-ISv6
routingaggregationandits
level.
Thedefaultislevel-2.
Result:GlobalparametersofIS-ISv6protocolhavebeencong-
ured.
ConfiguringIS-ISv6Interface
Parameters
TocongureinterfaceparametersofIS-ISv6protocol,performthe
followingsteps.
St-
ep
CommandFunction
1
ZXR10(config)#interface<interface-name>Thisentersinterface
congurationmode.
ZXR10(config-if)#circuit-type{level-1|level-1-2|
level-2-only}
ThiscongurestheIS-ISv6
circuit-typeonaninterface.
Thedefaultcircuittypeis
level-1–2.
2
46CondentialandProprietaryInformationofZTECORPORATION