Zte ZXR10 T600

ZXR10T600/T1200UserManual(IPv6Volume)
St-
ep
CommandFunction
ZXR10(config-router)#neighbor<ip-address>|<peer-g
roup-name>strict-capability-match
ThisdisablesBGPconnection
whenlocalconguration
capabilitydoesnotmatch
withneighbors’strictly.
ZXR10(config-router)#neighbor<ip-address>|<pe
er-group-name>timers{<keepalive><holdtime>|
connect<connecttime>
Thiscongurestheholdtime,
keepaliveandconnecttimers
ofaneighbor(inseconds),in
rangeof0or3-65535.
ZXR10(config-router)#neighbor<ip-address>|<peer-g
roup-name>unsuppress-map<map-name>
Thisadvertisessomemore
specialroutestoneighbor
selectively.
ZXR10(config-router)#neighbor<ip-addre
ss>|<peer-group-name>update-source<
interface-name>|<interface-address>
ThismakestheBGPsession
useanyoperableTCP
connectioninterface.
ZXR10(config-router)#neighbor<ip-address>|<peer
-group-name>weight[<value>]
Thissetsthedefaultweight
valueforadvertisingroutes
toneighbor .
Result:ThecongurationsinBGProutingmodehasbeennished.
ConfiguringIPv6AddressFamily
Mode
TocongureBGP4+,useaddress-familyipv6commandinthe
IPv6routingmodetoentertheIPv6addressfamilymode.The
followingcommandsareavailableinthismode.
TocongureIPv6addressfamilymode,usethefollowingcom-
mands.
St-
ep
CommandFunction
1
ZXR10(config)#routerbgp<as-number>
ThisconguresASnumber
andentersBGProute
congurationmode.
2
ZXR10(config-router)#address-familyipv6
ThisentersintoIPv6address
familymode.
60CondentialandProprietaryInformationofZTECORPORATION