Zte ZXV10 ET301 - Configuring a Network Connection; Figure 4-3 Configuration Wizard - Pick a Name

ZXV10ET301UserGuide
Figure4-3CongurationWizard—Pickaname
Note:
lIfnecessary,youcanskipasteptemporarily.
lToconguretheterminalname,select
>General>TerminalName.For
details,referto4.1.5ConguringGeneralParameters.
4.1.2ConfiguringaNetworkConnection
Thisproceduredescribeshowtocongureanetworkenvironmentandobtainanetwork
address,inordertoenabletheterminaltocommunicatewithotherdevices.
Prerequisite
Theterminalisnotengagedinaconference.
Steps
1.PresstheBackkeyontheremotecontroltodisplaythehomepage.
2.Fromthehomepage,select>Network>Ethernet,theEthernetConguration
windowisdisplayed,seeFigure4-4.
4-4
SJ-20190419091840-001|2019-04-08(R1.0)ZTEProprietaryandCondential