Zte ZXV10 ET301 - Figure 4-10 Qos Setting Window; Table 4-9 FEC Parameter Descriptions; Table 4-10 Auto IP Rate Parameter Descriptions

Chapter4SystemCongurations
Figure4-10QoSSettingWindow
3.SelectFEC.SetFECparametersbyreferringtoT able4-9.
Table4-9FECParameterDescriptions
ParameterDescription
EnableFECWhethertoenabletheFECfunction.Youarerecommendedto
enablethefunctionandtheIPAutoRatefunction.
Audio/PrimaryVideo/Sec-
ondaryVideoPacketLoss
Ratio
Thepacketlossratioattheremoteend,includingAuto,1%,
3%,5%,10%,20%,and30%.Automeansthepacketloss
ratioissubjecttotheactualsituationattheremoteend.
Audio/PrimaryVideo/Sec-
ondaryVideoRedundancy
Options:Auto,5%,10%,15%,20%,30%,40%,50%,and
100%.Autobydefault.
Audio/PrimaryVideo/Sec-
ondaryVideoKeepBandwidth
Whethertolowerthecoderatetokeepthetotalbandwidth
unchanged.
4.SelectAutoIPRate.SetAutoIPRateparametersbyreferringtoT able4-10.
Table4-10AutoIPRateParameterDescriptions
ParameterDescription
AutoIPRateIfAutoIPRateisselected,theZXV10ET301terminalenablesautoIPrate
function,andyouneedtosetLowestTx.
lWhenthenetworkqualitydeterioratesandthepacketlossratioexceedsthe
threshold,theconferencerateisdecreased.
lWhenthenetworkrecoverstothenormalsituation,thesystemincrease
theconferencerateautomatically.
Ifthisparameterisnotselected,thisfunctionisnotenabled.
4-19
SJ-20190419091840-001|2019-04-08(R1.0)ZTEProprietaryandCondential