Zte ZXV10 ET301 - Figure 4-9 Call Setting Window; Table 4-8 Call Parameter Descriptions

Chapter4SystemCongurations
Figure4-9CallSettingWindow
3.Setthecallparameters.Foradescriptionoftheparameters,refertoTable4-8.
Table4-8CallParameterDescriptions
ParameterDescription
Thedefault
contacttype
WhethertheterminaloriginatescallstootherterminalsviaSIPorH.323.
SIPtypeIfThedefaultcontacttypeissettoSIP ,thisparametermustbesetbased
onthenetworksituation.Options:URIandTEL.
Bydefaultthecall
rate
Thedefaultrateforaterminaltooriginateacalltoanotherterminal.
Apoint-to-point
callresponse
Selecttheanswermodeforapoint-to-pointcall:Auto,Manual,DoNot
DisturbandAuto(Onlyaudio).
lAuto:Whenacallisreceived,theterminalautomaticallyanswersthe
callandconnectstotheconference.
lManual:Whenacallisreceived,theterminaldisplaysacallprompt
askingyouwhethertoacceptthecall.
lDoNotDisturb:Whenacallisreceived,theterminaldirectlyrejects
thecall.
lAuto(Onlyaudio):Whenthereisanincomingcall,theZXV10ET301
terminaldirectlyconnectstheconferencebyaudiomode.
4-17
SJ-20190419091840-001|2019-04-08(R1.0)ZTEProprietaryandCondential