Chapter 6 App Tutorials
AX/DX/EX/PX Series User’s Guide
121
Follow the steps below to set up your Non-MPro Mesh Router with the Zyxel MPro Mesh Extender.
1 Turn on the router. Note the power LEDs when you’re done.
2 Connect an Ethernet cable from the router to Extender 1. The SSID and key is copied from Extender 1 to
the router. Place Extender 1 where you want WiFi coverage.
3 Download the app to your smart phone and log into Extender 1 (the MPro Mesh controller) using the
default label information on Extender 1. You may need to forget your current WiFi connection on your
smartphone.
4 Change the default SSID and WiFi key on Extender 1; see Section 6.4 on page 115 for more information.
After applying changes, you will need to reconnect to Extender 1 again using the new SSID and WiFi
key.
5 Use WPS to copy the SSID and WiFi key from Extender 1 to Extender 2.
Table 22 Devices Role
Zyxel Device Non-MPro Mesh Router MPro Mesh Extender
Role Internet Access Mesh Network Controller& Repeater/ AP
To Next Page
Loading...
