Chapter 9 Wireless
AX/DX/EX/PX Series User’s Guide
187
Figure 101 Wireless > General: More Secure: WPA3-SAE/WPA2-PSK
The following table describes the labels in this screen.
Table 45 Wireless > General: More Secure: WPA3-SAE/WPA2-PSK
LABEL DESCRIPTION
Security Level Select More Secure to enable data encryption.
Security Mode Select a security mode from the drop-down list box.
Generate
password
automatically
Select this option to have the Zyxel Device automatically generate a password. The password
field will not be configurable when you select this option.
Password Select Generate password automatically or enter a Password.
The password has two uses.
1. Manual. Manually enter the same password on the Zyxel Device and the client. Enter 8 – 63
ASCII characters or exactly 64 hexadecimal (‘0 – 9’, ‘a – f’) characters.
2. WPS. When using WPS, the Zyxel Device sends this password to the client.
Note: Enter 8 – 63 ASCII characters only. 64 hexadecimal characters are not
accepted for WPS.
Click the Eye icon to show or hide the password for your wireless network. When the Eye icon is
slashed , you’ll see the password in plain text. Otherwise, it is hidden.
more... Click this to show more fields in this section. Click this to hide them.
Encryption
AES is the default data encryption type, which uses a 128-bit key.
Select the encryption type (AES or TKIP+AES) for data encryption.
Select AES if your WiFi clients can all use AES.
Select TKIP+AES to allow the WiFi clients to use either TKIP or AES.
Timer This is the rate at which the RADIUS server sends a new group key out to all clients.
To Next Page
Loading...
