Chapter 17 Interface Grouping
AX/DX/EX/PX Series User’s Guide
297
Figure 181 Network Setting > Interface Grouping > Interface Group Configuration (for AON and PON
routers)
The following table describes the fields in this screen.
Table 100 Network Setting > Interface Grouping > Add/Edit
LABEL DESCRIPTION
Group Name Enter a name to identify this group. You can enter up to 30 characters. You can use letters,
numbers, hyphens (–) and underscores (_). Spaces are not allowed.
WAN Interfaces
used in the
grouping
Select the WAN interface this group uses. The group can have up to one PTM interface, up to
one ATM interface, up to one ETH interface, and up to one WWAN interface.
Select None to not add a WAN interface to this group.
To Next Page
Loading...
