Chapter 3 Web Configurator
AX/DX/EX/PX Series User’s Guide
63
Security Log Use this screen to view all security related events. You can select the
level and category of the security events in their proper drop-down list
window.
Levels include:
•Emergency
•Alert
• Critical
• Error
• Warning
•Notice
• Informational
•Debugging
Categories include:
• Account
• Attack
•Firewall
• MAC Filter
Traffic Status WAN Use this screen to view the status of all network traffic going through the
WAN port of the Zyxel Device.
LAN Use this screen to view the status of all network traffic going through the
LAN ports of the Zyxel Device.
NAT Use this screen to view NAT statistics for connected hosts.
VoIP Status VoIP Status Use this screen to view VoIP registration, current call status and phone
numbers for the phone ports.
ARP table ARP table Use this screen to view the ARP table. It displays the IP and MAC address
of each DHCP connection.
Routing Table Routing Table Use this screen to view the routing table on the Zyxel Device.
Multicast Status IGMP Status Use this screen to view the status of all IGMP settings on the Zyxel Device.
MLD Status Use this screen to view the status of all MLD settings on the Zyxel Device.
xDSL Statistics xDSL Statistics Use this screen to view the Zyxel Device’s xDSL traffic statistics.
WLAN Station
Status
WLAN Station
Status
Use this screen to view the wireless stations that are currently associated
to the Zyxel Device’s wireless LAN.
Cellular
Statistics
Cellular Statistics Use this screen to look at the cellular Internet connection status.
GPON Status GPON Status Use this screen to view the fiber transceiver’s TX power and RX power
level and its temperature.
Note: Not yet available as of this writing.
Maintenance
System System Use this screen to set the Zyxel Device name and Domain name.
User Account User Account Use this screen to change the user password on the Zyxel Device.
Remote
Management
MGMT Services Use this screen to enable specific traffic directions for network services.
Trust Domain Use this screen to view a list of public IP addresses which are allowed to
access the Zyxel Device through the services configured in the
Maintenance > Remote Management screen.
SNMP SNMP Use this screen to configure SNMP (Simple Network Management
Protocol) settings.
Table 16 Navigation Panel Summary (continued)
LINK TAB FUNCTION
To Next Page
Loading...
