Chapter 8 Broadband
AX/DX/EX/PX Series User’s Guide
159
8.3 Broadband Settings for Ethernet, AON and PON
Routers
Use this screen to change your Zyxel Device’s Internet access settings. The summary table shows you the
configured WAN services (connections) on the Zyxel Device. Use information provided by your ISP to
configure WAN settings.
Note: The differences of the broadband screens between Ethernet, AON and PON routers are
the type of connections available.
Click Network Setting > Broadband to access this screen.
Figure 89 Network Setting > Broadband (Ethernet Routers)
Figure 90 Network Setting > Broadband (AON and PON Routers)
The following table describes the labels in this screen.
Table 36 Network Setting > Broadband
LABEL DESCRIPTION
Add New WAN
Interface
Click this button to create a new connection.
# This is the index number of the entry.
Name This is the service name of the connection.
Type This displays the type of connections available.
Mode This shows whether the connection is in routing or bridge mode.
Encapsulation This is the method of encapsulation used by this connection.
To Next Page
Loading...
