Chapter 2 Hardware
AX/DX/EX/PX Series User’s Guide
49
The following table describes the items on the ports panels of DX3300-T0, DX3301-T0, DX5301-B2/B3,
DX5401-B0, EX3300-T0/EX2210-T0, EX3301-T0, EX5300-B3, EX5301-B3 and EX5401-B0.
2.3.3 EX5600-T1, EX5601-T0, and EX5601-T1
Figure 31 EX5600-T1
Table 12 Panel Ports and Buttons
LABEL DESCRIPTION
WAN For DX5301-B3, EX3300-T0/EX2210-T0, EX3301-T0, EX5300-B3, EX5301-B3 and EX5401-B0, connect an
Ethernet cable to the WAN port for Internet access.
For DX5301-B2, connect an Ethernet cable or a SFP cable for Internet access.
LAN1 – LAN4 Connect computers or other Ethernet devices to Ethernet ports for Internet access.
FIBER For DX5401-B0 and EX5401-B0, Insert a compatible SFP transceiver to the FIBER port and connect the
fiber cable for Internet access.
USB The USB port is used for cellular WAN backup, file-sharing, and media server.
DSL For DX3300-T0, DX3301-T0, DX5301-B2/B3 and DX5401-B0, connect a DSL cable to the DSL port for
Internet connection.
PHONE1/2
For DX3301-T0, DX5301-B2/B3, DX5401-B0, EX3301-T0, EX5301-B3,and EX5401-B0, connect analog
phones to the PHONE ports to make phone calls.
RESET Press the button to return the Zyxel Device to the factory defaults.
POWER Connect the power adapter and press the ON/OFF button to start the device.
WPS Press the WPS button for more than 5 seconds to quickly setup a secure wireless connection
between the device and a WPS-compatible client.
WLAN Press the WLAN button for more than 2 seconds to enable the wireless function.
To Next Page
Loading...
