Chapter 18 USB Service
AX/DX/EX/PX Series User’s Guide
302
Figure 184 Network Setting > USB Service
Note: The Share Directory List is only visible when you connect a USB device.
Each field is described in the following table.
Table 102 Network Setting > USB Service
LABEL DESCRIPTION
Information
Volume This is the volume name the Zyxel Device gives to an inserted USB device.
Capacity This is the total available memory size (in megabytes) on the USB device.
Used Space This is the memory size (in megabytes) already used on the USB device.
Server Configuration
File Sharing
Services
Click this switch to enable or disable file sharing through the Zyxel Device. When the switch goes
to the right , the function is enabled.
Share Directory List
Add New Share Click this to set up a new share on the Zyxel Device.
Active Select this to allow the share to be accessed.
Status This field shows the status of the share
: The share is not activated.
: The share is activated.
Share Name This field displays the name of the file you shared.
To Next Page
Loading...
