ZyXEL Communications ES-3124 - Enable Mode; Table 85 Command Summary: Enable Mode

ES-3124 Series User’s Guide
Chapter 34 Introducing Commands 249
34.11.2 Enable Mode
The following table describes the commands available for Enable mode.
<IP|host-name> [vlan
<vlan-id>]
[size <0-1472>]
[-t]
Sends Ping request to an Ethernet device in the
specified VLAN(s) with the specified parameters.
0
help
Displays command help information. 0
tracerout
e
<ip|host-name>
Determines the path a packet takes to a device. 0
<ip|host-name>
[vlan <vlan-id>]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a device in a
VLAN.
0
help
Displays command help information. 0
ssh <1|2> <[user@]dest-
ip>
Connects to an SSH server with the specified SSH
version.
0
Table 84 Command Summary: User Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 85 Command Summary: Enable Mode
COMMAND DESCRIPTION PRIVILEGE
help
Displays help information. 13
logout
Exits Enable (or privileged) mode. 13
exit
Exits Enable (or privileged) mode. 13
history
Displays a list of command(s) that
you have previously executed.
13
enable
Accesses Enable (or privileged)
mode.
13
disable
Exits Enable (or privileged) mode. 13
configure
Accesses Configuration mode.
See Section 34.11.3 on page 254.
13
stk-port-
test
Tests stack port list. 13
no logging
Clears system logs. 13
arp
Flushes the ARP (Address
Resolution Protocol) table.
13
interface <port-
number>
Clears the interface status of the
specified port(s).
13
show ip
Displays IP related information. 13
arp
Displays the ARP table. 13
tcp
Displays TCP related information. 13