ES-3124 Series User’s Guide
74 Chapter 6 System Status and Port Statistics
PD
PowerConsumption
(mW)
(PWR models only)
This field shows the power consumption of the powered device connected to the port.
This field is not available for the Gigabit and mini-GBIC ports.
PD MaxCurrent
(mA)
(PWR models only)
This field shows the maximum current a powered device can get from the switch. If the
powered device’s power consumption exceeds the maximum power offered by the
switch, the switch stops sending power.
The switch can provide up to 351.36mA current to one PD connected to each 10/
100Mbps Ethernet port and up to a total of 123.2W power to all PDs connected to the
switch.
This field is not available for the Gigabit and mini-GBIC ports.
PD MaxPower (mW)
(PWR models only)
This field shows the maximum power the switch can provide through this port.
This field is not available for the Gigabit and mini-GBIC ports.
LACP This field shows if LACP is enabled on this port or not.
TxPkts This field shows the number of transmitted frames on this port
RxPkts This field shows the number of received frames on this port
Errors This field shows the number of received errors on this port.
Tx KB/s This field shows the number kilobytes per second transmitted on this port.
Rx KB/s This field shows the number of kilobytes per second received on this port.
Up Time This field shows the total amount of time the connection has been up.
Tx Packet
The following fields display detailed information about packets transmitted.
TX Packet This field shows the number of good packets (unicast, multicast and broadcast)
transmitted.
Multicast This field shows the number of good multicast packets transmitted.
Broadcast This field shows the number of good broadcast packets transmitted.
Pause This field shows the number of 802.3x Pause packets transmitted.
Tagged This field shows the number of packets with VLAN tags transmitted.
Rx Packet
The following fields display detailed information about packets received.
RX Packet This field shows the number of good packets (unicast, multicast and broadcast)
received.
Multicast This field shows the number of good multicast packets received.
Broadcast This field shows the number of good broadcast packets received.
Pause This field shows the number of 802.3x Pause packets received.
Control This field shows the number of control received (including those with CRC error) but it
does not include the 802.3x Pause frames.
TX Collision
The following fields display information on collisions while transmitting.
Single This is a count of successfully transmitted frames for which transmission is inhibited by
exactly one collision.
Multiple This is a count of successfully transmitted frames for which transmission was inhibited
by more than one collision.
Table 8 Status: Port Details (continued)
LABEL DESCRIPTION
To Next Page
Loading...
