17/100
www.zyxel.com
3.1.1 How to configure Static VLAN on the switch?
Overview
Static VLAN is the widest used VLAN in real application. It can cross multiple
switches. It does add s 4 bytes to be tagged frame into its normal MTU.
Static VLAN topology,
Figure 1
Note: In the scenario, both switch is configured with VLAN10/20, in order to let the
same VLAN to communicate is to tag the frames with a VID number.
1. Check the Active to activate the VLAN settings. Enter a descriptive name for
VLAN group for identification purpose and enter the valid VLAN ID for this static
entry.
Figure 2 Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup
To Next Page
Loading...
