90/100
www.zyxel.com
9.1.1 How to block host to access internet?
Overview
We define three rules. First, we define a classifier for the traffic that is coming from
port 2 is the host and its source address 192.168.1.100; second, we specify a
classifier for the traffic from port 2. Finally we specify a classifier for ARP.
1. Select Active, set Name as “Allport2”, select “Count” and Ingress port as 2,
then clicks Add to run feature.
Figure 1 Advanced Application > Classifier> Classifier Configuration
To Next Page
Loading...
