ZyXEL Communications GS1920 - How to Configure GVRP on the Switch

27/100
www.zyxel.com
3.1.6 How to configure GVRP on the switch?
Overview
GVRP a protocol dynamically exchange VLAN configuration information with
other devices.
GVRP topology:
Figure 1
Note: In the scenario both switch port number 5 are enable with GVRP features,
so that the switch 1 will learn the switch 2 VLAN configuration dynamically, same
with switch 2 it will learn the VLAN configuration of switch 1 dynamically.
1. Check the GVRP box to activate the features and select which port should be
process with GVRP features. Then click Apply to activate the features.
Figure 2 ADVANCED APPLICATION > VLAN > VLAN CONFIGURATION > VLAN PORT
SETUP