25/100
www.zyxel.com
3.1.5 How to configure MAC Base VLAN on the switch?
Overview
MAC-based VLAN feature assigns incoming untagged packets to a VLAN and
classifies the traffic based on the source MAC address of the packet. A feature
that decides the VLAN for forwarding an untagged frame based on the source
MAC address of the frame.
MAC Base VLAN topology:
Figure 1
Note: In the scenario, the switch port is configured with the specific device (Client
A) VID & MAC address.
1. Fill in the exact MAC address of the device and enter which VID group number
to be configured then click Add to run the features.
Figure 2 Advanced Application > VLAN > VLAN Configuration > MAC-based VLAN
To Next Page
Loading...
