ZyXEL Communications NWA3000-N Series - What You Need to Know; Before You Begin

Chapter 10 Device HA
NWA3000-N Series User’s Guide
128
10.1.2 What You Need to Know
The following terms and concepts may help as you read this chapter.
Management Access
You can configure a separate management IP address for each interface. You can
use it to access the NWA3000-N series AP for management whether the
NWA3000-N series AP is the master or a backup. The management IP address
should be in the same subnet as the interface IP address.
Synchronization
Use synchronization to have a backup NWA3000-N series AP copy the master
NWA3000-N series AP’s configuration, and certificates.
Note: Only NWA3000-N series APs of the same model and firmware version can
synchronize.
Otherwise you must manually configure the master NWA3000-N series AP’s
settings on the backup (by editing copies of the configuration files in a text editor
for example).
10.1.3 Before You Begin
• Configure a static IP address for each interface that you will have device HA
monitor.
Note: Subscribe to services on the backup NWA3000-N series AP before
synchronizing it with the master NWA3000-N series AP.