ZyXEL Communications NWA3000-N Series - HTTPS Example

Chapter 15 System
NWA3000-N Series User’s Guide
203
15.5.5 HTTPS Example
If you haven’t changed the default HTTPS port on the NWA3000-N series AP, then
in your browser enter “https://NWA3000-N series AP IP Address/” as the web site
address where “NWA3000-N series AP IP Address” is the IP address or domain
name of the NWA3000-N series AP you wish to access.
15.5.5.1 Internet Explorer Warning Messages
When you attempt to access the NWA3000-N series AP HTTPS server, a Windows
dialog box pops up asking if you trust the server certificate. Click View
Certificate if you want to verify that the certificate is from the NWA3000-N series
AP.
You see the following Security Alert screen in Internet Explorer. Select Yes to
proceed to the Web Configurator login screen; if you select No, then Web
Configurator access is blocked.
Figure 91 Security Alert Dialog Box (Internet Explorer)
Server Port You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service to access the NWA3000-N series AP.
Apply Click Apply to save your changes back to the NWA3000-N series AP.
Reset Click Reset to return the screen to its last-saved settings.
Table 73 Configuration > System > WWW > Service Control (continued)
LABEL DESCRIPTION