Chapter 11 User
NWA3000-N Series User’s Guide
138
Note: The default admin account is always authenticated locally, regardless of the
authentication method setting.
11.2 User Summary
The User screen provides a summary of all user accounts. To access this screen
click Configuration > Object > User.
Figure 62 Configuration > Object > User
The following table describes the labels in this screen.
limited-admin Look at NWA3000-N series AP
configuration (web, CLI)
Perform basic diagnostics (CLI)
WWW, TELNET, SSH, Console
Access Users
user Used for the embedded RADIUS server
and SNMPv3 user access
Browse user-mode commands (CLI)
Table 47 Types of User Accounts (continued)
TYPE ABILITIES LOGIN METHOD(S)
Table 48 Configuration > Object > User
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where
you can modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The NWA3000-N series
AP confirms you want to remove it before doing so.
Object
References
Select an entry and click Object References to open a screen that
shows which settings use the entry.
# This field is a sequential value, and it is not associated with a specific
user.
To Next Page
Loading...
