ZyXEL Communications NWA3000-N Series - Examples of Secure Telnet Using SSH

Chapter 15 System
NWA3000-N Series User’s Guide
213
15.6.5 Examples of Secure Telnet Using SSH
This section shows two examples using a command interface and a graphical
interface SSH client program to remotely access the NWA3000-N series AP. The
configuration and connection steps are similar for most SSH client programs. Refer
to your SSH client program user’s guide.
15.6.5.1 Example 1: Microsoft Windows
This section describes how to access the NWA3000-N series AP using the Secure
Shell Client program.
1 Launch the SSH client and specify the connection information (IP address, port
number) for the NWA3000-N series AP.
2 Configure the SSH client to accept connection using SSH version 1.
3 A window displays prompting you to store the host key in you computer. Click Yes
to continue.
Figure 97 SSH Example 1: Store Host Key
Enter the password to log in to the NWA3000-N series AP. The CLI screen displays
next.
15.6.5.2 Example 2: Linux
This section describes how to access the NWA3000-N series AP using the
OpenSSH client program that comes with most Linux distributions.