Chapter 15 System
NWA3000-N Series User’s Guide
199
15.4 Console Speed
This section shows you how to set the console port speed when you connect to the
NWA3000-N series AP via the console port using a terminal emulation program.
See Table 1 on page 25 for default console port settings.
Click Configuration > System > Console Speed to open this screen.
Figure 87 Configuration > System > Console Speed
The following table describes the labels in this screen.
Table 72 Configuration > System > Console Speed
LABEL DESCRIPTION
Console Port
Speed
Use the drop-down list box to change the speed of the console port.
Your NWA3000-N series AP supports 9600, 19200, 38400, 57600, and
115200 bps (default) for the console port.
The Console Port Speed applies to a console port connection using
terminal emulation software and NOT the Console in the NWA3000-N
series AP Web Configurator Status screen.
Apply Click Apply to save your changes back to the NWA3000-N series AP.
Reset Click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
