ZyXEL Communications NWA3000-N Series - Page 223

Chapter 15 System
NWA3000-N Series User’s Guide
223
Click Configuration > System > Auth. Server. The following screen displays.
Figure 106 Configuration > System > Auth. Server
The following table describes the labels in this screen.
Table 80 Configuration > System > Auth. Server
LABEL DESCRIPTION
Enable
Authentication
Server
Select this to have the NWA3000-N series AP use its internal RADIUS
server to authenticate wireless clients connecting to trusted APs.
Authentication
Server
Certificate
Select the certificate the NWA3000-N series AP’s internal RADIUS
server uses for authenticating wireless clients connecting to trusted
APs.
Note: It is recommended that you replace the factory default
certificate with one that uses your NWA3000-N series AP's
MAC address. Do this when you first log in to the NWA3000-
N series AP or in the Object > Certificate > My Certificates
screen.
Trusted Client Use this table to manage the list of profiles of trusted APs for which the
NWA3000-N series AP authenticates wireless clients.
Add Click this to add a new trusted AP profile.
Edit Click this to edit the selected trusted AP profile.
Remove Click this to remove the selected trusted AP profile.
Activate To turn on a profile, select it and click Activate.
Inactivate To turn off a profile, select it and click Inactivate.
# This field is a sequential value, and it is not associated with a specific
profile.
Status This field shows whether or not the entry is activated.