Check AP whether set the AP profile that you created.
2 Check the port number of LDAP server
To confirm the network traffic, please make sure the port of server is same as
that configured in the NXC5500 and login the console of NXC and LDAP
server.
Check the port number
The default port of LDAP server in the NXC is 389. If you have the firewall in
network, please check those ports also are opened in the firewall.
3 Ping the LDAP server and AP
To confirm the network traffic, please make sure the port of server is same as
that configured in the NXC5500 and login the console of NXC and LDAP
server.
Confirm the fluent network traffic between AP and LDAP server.
NXC ping to external LDAP server and AP
Figure 271 Tera Term > NXC > Router > ping <LDAP server’s IP> and AP’s IP
LDAP server pings to NXC and AP.
Figure 272 AD server > cmd > ping <NXC’s IP> and AP’s IP
To Next Page
Loading...
