Chapter 4 Dashboard
PLA5236 User’s Guide
23
The following table describes the labels in this screen.
Table 6 The Dashboard Screen
LABEL DESCRIPTION
Refresh Interval Select a number of seconds or None from the drop-down list box to refresh all screen statistics
automatically at the end of every time interval or to not refresh the screen statistics.
Refresh Now Click this button to refresh the status screen statistics.
Device Information
Host Name This is the PLA’s model name.
Firmware Version This is the firmware version and the date created.
LAN Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
Default Gateway This shows the gateway IP address.
DHCP This shows the LAN port’s DHCP role - Client or None.
WLAN Information
WLAN OP Mode This is the device mode to which the PLA’s 2.4GHz wireless LAN is set - Access Point Mode.
MAC Address This shows the wireless adapter MAC Address of your device.
SSID This shows a descriptive name used to identify the PLA in the wireless LAN.
Channel This shows the channel number which the PLA is currently using over the wireless LAN.
Security This shows the level of wireless security the PLA is using.
WPS Status This displays Configured when the WPS has been set up.
This displays Unconfigured if the WPS has not been set up.
WLAN_5G Information
WLAN OP Mode This is the device mode to which the PLA’s 5GHz wireless LAN is set - Access Point Mode.
MAC Address This shows the wireless adapter MAC Address of your device.
SSID This shows a descriptive name used to identify the PLA in the wireless LAN.
Channel This shows the channel number which the PLA is currently using over the wireless LAN.
Security This shows the level of wireless security the PLA is using.
WPS Status This displays Configured when the WPS has been set up.
This displays Unconfigured if the WPS has not been set up.
Summary
Packet Statistics Click Details... to go to the Monitor > Packet Statistics screen (Section 6.4 on page 28). Use this
screen to view port status and packet specific statistics.
WLAN Station Status Click Details... to go to the Monitor > WLAN Station Status screen (Section 6.5 on page 29). Use this
screen to view the 2.4Ghz wireless stations that are currently associated to the PLA.
WLAN_5G Station Status Click Details... to go to the Monitor > WLAN Station Status screen (Section 6.6 on page 30). Use this
screen to view the 5Ghz wireless stations that are currently associated to the PLA.
System Status
Item This column shows the type of data the PLA is recording.
Data This column shows the actual data recorded by the PLA.
System Up Time This is the total time the PLA has been on.
Current Date/Time This field displays your PLA’s present date and time.
To Next Page
Loading...
