Chapter 4 Dashboard
PLA5236 User’s Guide
24
System Resource
CPU Usage This displays what percentage of the PLA’s processing ability is currently used. When this
percentage is close to 100%, the PLA is running at full load, and the throughput is not going to
improve anymore. If you want some applications to have more throughput, you should turn off
other applications (for example, using bandwidth management.
Memory Usage This shows what percentage of the heap memory the PLA is using.
Interface Status
Interface This displays the PLA port types. The port types are: LAN and WLAN.
Status For the LAN ports, this field displays Down (line is down) or Up (line is up or connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is disabled.
Rate For the LAN ports, this displays the port speed or N/A when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/A
when the WLAN is disabled.
Table 6 The Dashboard Screen
LABEL DESCRIPTION
To Next Page
Loading...
