193/749
Go to WatchGuard System Status > VPN Statistics > Branch Office VPN and check
the tunnel Status is up and Bytes In (Incoming Data) and Bytes Out (Outgoing
Data).
System Status > VPN Statistics > Branch Office
To test whether or not a tunnel is working, ping from a computer at one site to a
computer at the other. Ensure that both computers have Internet access (via the
IPSec devices).
PC behind ZyWALL/USG > Window 7 > cmd > ping 192.168.10.33
PC behind WatchGuard> Window 7 > cmd > ping 192.168.1.33
To Next Page
Loading...
