ZyXEL Communications USG210 - Set up the Zywall;Usg VTI of Corporate Network (Branch)

401/749
www.zyxel.com
10 Go to CONFIGURATION > Network > Interface > VTI. You will see that the status of
the VTI is up when the corresponding VPN tunnel is established.
CONFIGURATION > Network > Interface > VTI
Set Up the ZyWALL/USG VTI of Corporate Network (Branch)
1 In the ZyWALL/USG, go to CONFIGURATION > VPN > IPSec VPN > VPN Gateway >
Add to create the VPN gateway BO1 with wan1.
CONFIGURATION > VPN > IPSec VPN > VPN Gateway > Add