ZyXEL Communications USG210 - Upload the Configuration Files from the Zywall;Usg

639/749
www.zyxel.com
A pop-up screen will appear allowing you to edit the Target file name. Select
Immediately stop applying the configuration file and roll back to the previous
configuration to get the ZyWALL/USG started with a fully valid configuration file as
quickly as possible. Click OK to have the ZyWALL/USG start applying the
configuration file.
MAINTENANCE > File Manager > Configuration File > Apply Configuration File
Upload the Configuration Files from the ZyWALL/USG
In the ZyWALL/USG, go to MAINTENANCE > File Manager > Configuration File >
Note: Do not shut down the ZyWALL/USG while the configuration file is being applied.