ZyXEL Communications USG210 - How to Configure Site-To-Site Ipsec VPN with Microsoft (MS) Azure

29/749
www.zyxel.com
How to Configure Site-to-site IPSec VPN with Microsoft (MS)
Azure
This example shows how to use the VPN Setup Wizard to create a site-to-site VPN
between a ZyWALL/USG and a Microsoft (MS) Azure platform. The example
instructs how to configure the VPN tunnel between each site. When the VPN
tunnel is configured, each site can be accessed securely.
ZyWALL Site-to-site IPSec VPN with Microsoft (MS) Azure
Note:
1. All network IP addresses and subnet masks are used as examples in this article. Please
replace them with your actual network IP addresses and subnet masks. This example was
tested using USG40 (Firmware Version: ZLD 4.25) and MS Azure (April, 2016).