ZyXEL Communications USG210 - Test the Ipsec VPN Tunnel

45/749
www.zyxel.com
When the connection is complete, you'll see it appear in the Connections blade
for your Gateway.
VPN_Connection_to_USG > Settings > Connections
Test the IPSec VPN Tunnel
Go to ZyWALL/USG CONFIGURATION > VPN > IPSec VPN > VPN Connection, click
Connect on the upper bar. The Status connect icon is lit when the interface is
connected.
CONFIGURATION > VPN > IPSec VPN > VPN Connection
Go to ZyWALL/USG MONITOR > VPN Monitor > IPSec and verify the tunnel Up Time
and the Inbound(Bytes)/Outbound(Bytes) traffic.