ZyXEL Communications USG210 - Set up the Zywall;Usg Ipsec VPN Tunnel of Corporate Network (Branch)

66/749
www.zyxel.com
Go to CONFIGURATION > VPN > IPSec VPN > VPN Gateway and click Show
Advanced Settings. Configure Authentication > Peer ID Type as Any to let the
ZyWALL/USG does not require to check the identity content of the remote IPSec router.
CONFIGURATION > VPN > IPSec VPN > VPN Gateway > Show Advanced Settings >
Authentication > Peer ID Type
Set Up the ZyWALL/USG IPSec VPN Tunnel of Corporate Network
(Branch)
In the ZyWALL/USG, go to CONFIGURATION >Quick Setup > VPN Setup Wizard, use
the VPN Settings wizard to create a VPN rule that can be used with the remote
ZyWALL/USG. Click Next.
Quick Setup > VPN Setup Wizard > Welcome