ZyXEL Communications USG210 - Set up the Wifi Guest Account, Address Range and Service Rule on the Zywall;Usg

684/749
www.zyxel.com
Set Up the WiFi Guest Account, Address Range and Service Rule
on the ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > Object > User/Group > User > Add A
User to configure the User Name the guest Wi-Fi user and set User Type to guest.
Set a secured Password (4-31 characters) and enter it again for confirmation.
Set the Authentication Timeout Settings to be Use Manual Settings to enter the
number of minutes this user has to renew the current session before the user is
logged out.
CONFIGURATION > Object > User/Group > User > Add A User
In the ZyWALL/USG, go to CONFIGURATION > Object > Address > Add Address Rule
to create the guest Wi-Fi user access subnet. In this example, AP is connected to
ZyWALL/USG LAN interface 192.168.2.0/24. Configure the Name for you to identify
the Wi-Fi guest subnet. Set the Network to be 192.168.2.0 and set the Netmask to
be 255.255.255.0. Click OK.