657/749
Configure descriptive SSID name (1-32 characters) for the wireless LAN. Select
Pre-Shared Key (8-63 characters) to add security on this wireless network.
Otherwise, select None to allow any wireless client to associate this network
without authentication.
Select Hidden SSID to hide the SSID from site tool scanning.
Select Enable Intra-BSS Traffic blocking if you want to prevent crossover traffic from
within the same wireless network. Wireless clients in that network can still access
the wired network but cannot communicate with each other.
For Built-in Wireless AP only, ZyWALL/USGs with W in the model name have a
built-in AP. Select an interface to bridge with the built-in AP wireless network.
Devices connected to this interface will then be in the same broadcast domain as
To Next Page
Loading...
