99/749
Then, configure the Secure Gateway IP as the Branch A’s Gateway IP address (in
the example, 172.16.20.1). Type a secure Pre-Shared Key (8-32 characters) which
must match your Branch A’s Pre-Shared Key.
Set Local Policy to be the IP address range of the network connected to the
Hub_HQ and Remote Policy to be the IP address range of the network connected
to the Branch A. Click OK.
Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Configuration)
This screen provides a read-only summary of the VPN tunnel. Click Save.
Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Summary)
To Next Page
Loading...
