188/749
Then, go to VPN > Branch Office VPN > Gateway > Phase 1 Settings to select
negotiation Mode the same as your ZyWALL/USG’s Phase 1 Settings. Make sure you
enable both NAT Traversa and Dead Peer Detection options if both options are
enabled in the ZyWALL/USG.
VPN > Branch Office VPN > Gateway > Phase 1 Settings
Use Transform Settings to create the same security settings as in the ZyWALL/USG
Phase 1 settings. Click OK and Save to exit the Transform Settings page.
VPN > Branch Office VPN > Gateway > Phase 1 Settings > Transform Settings
To Next Page
Loading...
