ZyXEL Communications USG310 - What Could Go Wrong

226/749
www.zyxel.com
What Could Go Wrong?
If you see below [info] or [error] log message, please check ZyWALL/USG Phase 1
Settings. Both ZyWALL/USG and SonicWALL must use the same Pre-Shared Key,
Encryption, Authentication method, DH key group and ID Type to establish the IKE
SA.
MONITOR > Log
If you see that Phase 1 IKE SA process done but still get below [info] log message,
please check ZyWALL/USG and SonicWALL Phase 2 Settings. Both ZyWALL/USG
and SonicWALL must use the same Protocol, Encapsulation, Encryption,
Authentication method and PFS to establish the IKE SA.