681/749
Test the Result
Go to the ZyWALL/USG Monitor > Wireless > AP Information > AP List, you can
check the list of APs which are currently connected to it and the details
information such as Registration type, Model and Recent On-line Time /Last
Off-line Time.
MONITOR > Wireless > AP Information > AP List
Go to the ZyWALL/USG Monitor > Wireless > Station Info > Station List, you can
check the list of wireless stations associated with a managed AP and the details
information such as SSID Name, Signal Strength and the transmit (Tx)/receive (Rx) data
rate.
MONITOR > Wireless > Station Info > Station List
Using a mobile device to connect to SSID: ZyXEL_AP1 and type the password
(zyxel123) for authentication. Go to the ZyWALL/USG Monitor > Log, you will see
[info] log message as shown below. The ZyWALL/USG will assign an IP address to
the mobile device and the mobile device can access the Internet.
MONITOR > Log
What Could Go Wrong?
If you can’t see AP information in the AP List, please check the number of APs
connected to the ZyWALL/USG has exceeded the maximum Managed AP
To Next Page
Loading...
