ZyXEL Communications USG310 - Test the L2 TP over Ipsec VPN Tunnel

296/749
www.zyxel.com
Test the L2TP over IPSec VPN Tunnel
Go to ZyWALL/USG CONFIGURATION > VPN > IPSec VPN > VPN Connection, the
Status connect icon is lit when the interface is connected.
CONFIGURATION > VPN > IPSec VPN > VPN Connection
Go to ZyWALL/USG MONITOR > VPN Monitor > IPSec and verify the tunnel Up Time
and the Inbound(Bytes)/Outbound(Bytes) traffic. Click Connectivity Check to
verify the result of ICMP Connectivity.
Hub_HQ > MONITOR > VPN Monitor > IPSec > WIZ_L2TP_VPN
Go to ZyWALL/USG MONITOR > VPN Monitor > L2TP over IPSec and verify the
Current L2TP Session.
MONITOR > VPN Monitor > L2TP over IPSec > L2TP_Remote_Users