709/749
Go to the ZyWALL/USG Monitor > System Status > Login Users, you will see current
login user list as below.
Monitor > System Status > Login Users
What Could Go Wrong?
If you see [notice] log shown as below, the Wi-Fi guest traffic is blocked by the
priority 1 Security Policy. The ZyWALL/USG checks the security policy in order and
applies the first security policy the traffic matches. If the Wi-Fi guest traffic matches
a policy that comes earlier in the list, it may be unexpectedly blocked. Please
change your policy setting or move the Wi-Fi guest policy to the higher priority.
Monitor > Log
If you see [alert] log message shown as below, the Wi-Fi guest traffic failed. Please
make sure you enable Web Authentication and check your AD server is working
properly.
Monitor > Log
Note: The default setting of Security Policy is without log notification (except
PolicyDefault), if you want to check which policy may potentially block the traffic, please
select this policy and set the Log matched traffic to be log or log alert.
To Next Page
Loading...
