ZyXEL Communications USG310 - Set up the L2 TP VPN Tunnel on the Windows 10

292/749
www.zyxel.com
Set Up the L2TP VPN Tunnel on the Windows 10
To configure L2TP VPN in Windows 10 operating system, go to Start > Settings >
Network & Internet > VPN > Add a VPN Connection and configure as follows.
VPN Provider set to Windows (built-in).
Configure Connection name for you to identify the VPN configuration.
Set Server name or address to be the ZyWALL/USG’s WAN IP address
(172.124.163.150 in this example).
Select VPN type to Layer 2 Tunneling Protocol with IPsec (L2TP/IPsec).
Enter User name and Password which the same as Allowed User created in
ZyWALL/USG (L2TP_Remote_Users/zyx168 in this example).