ZyXEL Communications USG310 - Page 464

464/749
www.zyxel.com
6. Check if any applications also use port 3316 (TCP), 514 (UDP) or 8080 (UDP) by
entering “netstat -a” into the command line. Uninstall them if any. Click OK.
When you finish installing Vantage Report, restart the Vantage Report server.
7. Open the browser window and go to http://a.b.c.d:xxxxxx/vrpt, where a.b.c.d is
the IP address of the Vantage Report server. If you open the configurator on the
same computer on which you installed Vantage Report server, enter localhost.
Xxxx is the port number you entered during installation (10.251.30.61:8080/vrpt/ in
this example).
In the login screen, enter default login User Name and Password: root.