Chapter 5 Quick Setup Wizards
ZyWALL/USG Series User’s Guide
150
Figure 123 VPN for Configuration Provisioning Express Wizard: Summary
• Rule Name: Identifies the VPN gateway policy.
• Secure Gateway: Any displays in this field because it is not configurable in this wizard. It allows
incoming connections from the ZyWALL/USG IPSec VPN Client.
• Pre-Shared Key: VPN tunnel password. It identifies a communicating party during a phase 1
IKE negotiation.
• Local Policy: (Static) IP address and subnet mask of the computers on the network behind your
ZyWALL/USG that can be accessed using the tunnel.
• Remote Policy: Any displays in this field because it is not configurable in this wizard.
•The Configuration for Secure Gateway displays the configuration that the ZyWALL/USG IPSec
VPN Client will get from the ZyWALL/USG.
• Click Save to save the VPN rule.
5.4.4 VPN Settings for Configuration Provisioning Express Wizard - Finish
Now the rule is configured on the ZyWALL/USG. The Phase 1 rule settings appear in the VPN >
IPSec VPN > VPN Gateway screen and the Phase 2 rule settings appear in the VPN > IPSec
VPN > VPN Connection screen. Enter the IP address of the ZyWALL/USG in the ZyWALL/USG
IPSec VPN Client to get all these VPN settings automatically from the ZyWALL/USG.
To Next Page
Loading...
