Chapter 42 Object
ZyWALL/USG Series User’s Guide
811
42.12.1 ISP Account Summary
This screen provides a summary of ISP accounts in the ZyWALL/USG. To access this screen, click
Configuration > Object > ISP Account.
Figure 559 Configuration > Object > ISP Account
The following table describes the labels in this screen. See the ISP Account Add/Edit section below
for more information as well.
42.12.1.1 ISP Account Add/Edit
The ISP Account Add/Edit screen lets you add information about new accounts and edit
information about existing accounts. To open this window, open the ISP Account screen. (See
Section 42.12.1 on page 811.) Then, click on an Add icon or Edit icon to open the ISP Account
Edit screen below.
Table 336 Configuration > Object > ISP Account
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
Object
References
Select an entry and click Object References to open a screen that shows which settings
use the entry.
# This field is a sequential value, and it is not associated with a specific entry.
Profile Name This field displays the profile name of the ISP account. This name is used to identify the
ISP account.
Protocol This field displays the protocol used by the ISP account.
Authentication
Type
This field displays the authentication type used by the ISP account.
User Name This field displays the user name of the ISP account.
To Next Page
Loading...
