ZyXEL Communications USG60 - AP Management Screens; Mgnt. AP List

Chapter 9 Wireless
ZyWALL/USG Series User’s Guide
242
Each field is described in the following table.
9.3 AP Management Screens
Use these screens to manage all of the APs connected to the ZyWALL/USG. Click Configuration >
Wireless > AP Management to access these screens.
Click on the icon to go to the OneSecurity.com website where there is guidance on configuration
walkthroughs and other information.
9.3.1 Mgnt. AP List
Figure 199 Configuration > Wireless > AP Management > Mgnt. AP List
Table 83 Configuration > Wireless > Controller
LABEL DESCRIPTION
Registration
Type
Select Manual to add each AP to the ZyWALL/USG for management, or Always Accept to
automatically add APs to the ZyWALL/USG for management.
If you select Manual, then go to Monitor > Wireless > AP Information > AP List, select
an AP to be managed and then click Add to Mgnt AP List. That AP will then appear in
Configuration > Wireless > Controller > Mgnt. AP List.
Note: Select the Manual option for managing a specific set of APs. This is recommended as the
registration mechanism cannot automatically differentiate between friendly and rogue
APs.
APs must be connected to the ZyWALL/USG by a wired connection or network.
Apply Click Apply to save your changes back to the ZyWALL/USG.
Reset Click Reset to return the screen to its last-saved settings.